Velleman HQ Power VDPC146, Руководство пользователя

Страница: 4 / 58

VDPC146
V. 02 – 21/10/2013 4 ©Velleman nv
• Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the
device against damage by leaving it switched off until it has reached room temperature.
•
This device is designed for professional use on stage, in discos, theatres, etc. The device should only be
used indoors with the appropriate current and power supply (see Technical Specifications below).
• Use the original packaging if the device is to be transported.
•
Do not remove the serial number sticker from the device as doing so will void the warranty.
•
Keep this manual for future reference.
4. Features
• 24 memory slots: with storage capacity for running light programs of up to 99 steps each
• functions: up chase/down chase, single or mix chase dark, full on, fade, tap sync and hold
• manual or music controlled
•
midi connection facility (midi in): to run the unit synchronously with your midi unit
•
speed setting for the running lights with a large control range
•
dimmer control per channel
•
clear LED indication for: rec step, dimmer, speed and fade duration
•
max. 48 patterns with 4600 scenes can be programmed (12 programmes under 4 pages)
• possibility to connect a foot switch (6.35 mm stereo jack plug)
• for panel mounting or stand-alone use
5. Overview
Refer to the illustrations on page 2 of this manual.
Front panel (image A)
1
LED indicators for PRESET A dimming controls
The LED lights when the slide control is moved
upwards.
2 Channel sliders (1 – 12)
Adjust the output of each channel between 0 – 100%
or 0 - 255.
3 Flash Keys (1 – 12)
Press a flash key to make a channel jump to 100%
output.
4 LED indicators for preset B dimming controls
The LED lights when the slide control is moved
upwards.
5 LED indicators for scene or chase selection
6 Channel sliders (13 – 24)
Adjust the output of each channel between 0 – 100%
or 0 - 255.
7 Flash keys (13 – 24)
Press a flash key to make a channel jump to 100%
output.
8 MASTER A fader
9 BLIND
Press this button simultaneously with a channel flash
key to deactivate that channel in CHASE/SCENES
mode.
9 Master B fader
11 HOME
Press this button simultaneously with a channel flash
key to reactivate that channel in CHASE/SCENES
mode.
12 Fade Time Slider Adjust the fade time with this slider.
13 TAP SYNC
Press this button twice to the rhythm of the music to
define the chase speed during the AUTO CHASE
mode.
14 SPEED slider To adjust the chaser speed manually.
15 FULL ON
Press this button to make all channels jump to 100%
output.
16 AUDIO LEVEL slider Adjusts the music sensitivity of the audio input.
17 BLACK OUT
Press this button to reduce the output of all channels
to zero.