CCTVPROM7
14/07/2010
©
Velleman nv
9
Configure
•
Select the ‘
Video Loss
’ option to get an audible
warning when one of the video signals is lost.
•
The
AutoSwitch
timer set the timer interval of the
sequential view mode. Value: 1~99s.
•
PIPConfig
sets the Picture-in-Picture settings. The first
channel is the inserted picture, the second channel is
the main (background) picture.
•
Select the VGA resolution settings: 1024x768/60Hz,
1280x1024/60Hz or 800x600/75Hz.
•
Enable or disable password protection. Set the
password via the
password
menu.
•
LockTime
is the timeout for the password to become
active. When no user activity is detected during locking
time, a password will be required to operate the DVR.
Set to 1, 2, 5, 10, 15 or 30 minutes or 1 hour. Setting
will only take effect when password is enabled.
Password
•
To change the password, first enter the old password.
Default password is
888888
.
•
Enter a new password. Only use the numbers on the
bottom of the screen.
•
Confirm the new password and press
OK
.
Date & Time
•
Set the date and time of the DVR. Date format is month
– day – year (MM-DD-YYYY), time format: hours –
minutes – seconds.
Note:
changing the time is not possible during
recording.
•
When finished, click
OK
to save or
CANCEL
to exit
without saving.
Note:
reset the system (see below) for the new
date/time to take effect.
Default configuration
•
Click
OK
to set the DVR back to factory defaults.
Reset
•
Click
OK
to restart the DVR.
About
•
Show system information e.g. hardware and software versions.
Содержание CCTVPROM7
Страница 2: ...CCTVPROM7 14 07 2010 Velleman nv 2 ...
