CAMSCC16
28/05/2009
©Velleman
nv
4
4.
Features
•
high sensitivity, low smear, high anti-blooming and high S/N ratio
•
removable IR-Cut filter provides change from colour to B/W mode
automatically or manually for day and night surveillance
•
RS-485/422 remote control via PELCO D&P protocol
•
with built-in auto electronic shutter
•
special functions via on-screen display (OSD) set-up menu
o
privacy masking
o
positive / negative image
o
video mirror function
o
digital zoom
•
no lens included
5.
Overview and use
Refer to the illustrations on page
2
of this manual.
A
Iris Video/DC drive selector. Set to
video drive
when using a video driven
auto iris lens (based on brightness of the image in the video signal), or to
DC drive
in case a direct driven auto iris lens is used (via a control signal
from the camera).
B
Auto iris lens connector. Supplies power and control signals to the auto
iris lens. Refer to page
2
for the pin lay-out.
Note:
a DC drive lens uses two coils, a driving coil (DRIVE) that
opens/closes the iris and a damping coil (DAMP) that stabilizes the
movement of the iris.
C
Control buttons:
(T)/
S
Zoom Tele or Up (
S
)
(W)/
T
Zoom Wide or Down (
T
)
(+)/
►
Increase Value (
＋
)
(-)/
◄
Decrease Value (
－
)
Menu Enter or Exit Setup Menu
D
Serial connector: to connect an external keyboard.
E
Signal Ground (
FG
): in case of a distorted signal, connecting this
terminal to earth might enhance the signal.
F
Power supply: connect a 12VDC or 24VAC power supply to these
terminals (no polarity).
G
Power LED: on when power is present on the terminals
[F]
.
H
Video output connector (BNC): connect the camera to a monitor (not incl.).
