Velleman CAMCOLD7, Руководство пользователя

Страница: 6 / 27

CAMCOLD7
00 (17/09/2008)
6
9.
Overview remote control
Function Remote Control
Search System Connection [0] -> [ENTER]
Rotate/view up Press [Direction Button-Upward]
Rotate/view down Press [Direction Button Downward]
Rotate/view left Press [Direction Button Leftward]
Mini Pan/ Tilt Dome Operation
Rotate/view right Press [Direction Button Rightward]
Select Mini Pan/ Tilt Dome Number Button ([1]~[9]) -> [ENTER]
Preset Position Setup Number button (16 Preset Points) -> [SET PRESET]
Call Preset Point Setup Number Button (16 Preset Points) -> [GO PRESET]
Start-up Preset Auto Pan Mode ([1]~[6]) -> [AUTO PAN]
Stop Preset Auto Pan Mode [AUTO PAN] or [Direction Button]
Deactivate Alarm [EVENT RESET]
No function defined
[AUTOFOCUS] [ZOOM IN] [ZOOM OUT] [FOCUS NEAR] [FOCUS
FAR] [SPEED +] [SPEED -]
10.
Troubleshooting
No power or unable to switch on
the mini pan/tilt dome
Verify and make sure that the right power adapter is used
No video image on monitor Check connection of the BNC video output
Unable to control the mini pan/tilt
dome
Verify the ID setting
Verify the RS-485 communication lines
Verify whether an alarm condition exists
Try restarting the dome
11. Technical specifications
camera
system PAL
sensor 1/3" Sony Super HAD colour CCD
number of pixels 582 (H) x 500 (V)
horizontal resolution 380 TV lines
video S/N ratio >= 48dB
min. illumination 0.2 lux / F2.0
iris auto
focal length 3.6mm
back light compensation yes
video output level 1.0Vpp / 75Ω, composite
synchronizing system internal (negative synchronisation)
gain control auto
white balance auto
electronic shutter control auto (1/50s-1/110.000s)
pan/tilt
pan angle 0° - 340°
tilt angle 0° - 80°
pan manual speed control 1° - 150°
tilt manual speed control 1° - 100°
pan auto speed control 1° - 300°
tilt auto speed control 1° - 200°
preset point 16 preset points (6 preset groups)
communication RS-485