Velcom MAGNOLIA, Руководство пользователя

Страница: 21 / 27

- 21 -
Warrantee obligations
1. The manufacturer guarantees that the greenhouse framework (hereinafter referred to
as the product) is new, fully equipped, and free of manufacturing defects.
2. The manufacturer is responsible for the completeness of the product.
3. The manufacturer is responsible for the assembly of the product according to the
instructions.
4. The warranty period for this product is twelve (12) months from the date of sale to the
purchaser through the retail network.
5. The warranty covers any manufacturing and material defects.
6. The warranty does not cover damage caused by corrosion of the product design
elements, snow and wind loads (more than 10 m/s).
7. The warrantee obligations will be expired in cases of:
- failure to comply with the assembly and installation instructions;
- failure to comply with the requirements for greenhouse operation;
- if the greenhouse is used for purposes other than those for which it is intended;
- in case of force majeure (natural disasters);
- in absence of the product datasheet.
8. The warranty does not apply to cellular polycarbonate.
Warning!
In winter, in order to prevent deformation of the greenhouse parts under exposure of snow
and wind loads, it is necessary to remove all sheets of cellular polycarbonate from the arched
part of the greenhouse (the greenhouse roof) by removing tie bands. The advantage of sheets
removing for winter is that the snow gets inside the greenhouse, which during melting enriches
the soil with useful minerals and protects it from desalinization. An open roof over the winter
prevents pests from crawling into the warm greenhouse with the onset of cold weather and
eating the young shoots in the spring.
If it is not possible to dismantle the sheets, the arches should be enhanced from the inside
with T-shaped wooden supports (from a wooden bar of at least 50x50 section), placing them
inside the greenhouse - one bar for each arch. Wooden supports are not included in the kit, make
your own. Depending on the climatic conditions and/or location of the greenhouse, it is up to
the purchaser to assess the possible snow load and, if necessary, to provide supports or remove
snow from the frame.
Failure to comply with the above requirements shall be a reason for rejection of product
warranty service.
Do not install the greenhouse closer than 2 meters to buildings, safety enclosure and fences.
If the greenhouse is installed in windy area, ensure its firmly fastening to the ground using
improvised means (rod, rebar, etc.). Do not subject the greenhouse framework to excessive
mechanical stresses. Do not modify the design of the product by yourself.