Velbus VMB4RYLD Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 70

Velbus VMB4RYLD Скачать руководство пользователя страница 39

VELBUS INSTALLATION GUIDE

©2015 Velbus

39

www.velbus.eu

Renaming the modules and channels

In a new Velbuslink project the module names will default to their type, but

they can then be renamed (eg. VMBGPOD could become “GPO

D-Master

Panel”).

Names can be 15 characters long.

Most module names are stored only in Velbuslink and not in the modules.
(Newer modules now store their name too.)

You can rename a module in different ways:



by double-clicking on the name



by selecting the module and pressing the F2-key on your keyboard



by selecting the module and clicking on the rename icon

above



by right-

clicking on it and selecting “Rename”

Channels can be renamed in the same way.

Channel names are always stored

in the respective modules.

It would be good practise to confirm the fixtures that are connected to each
output module by pressing the mechanical button on each output module, or
operating that channel from within Velbuslink (see

Operating channels from

within Velbuslink

above), then rename that output module and channel

accordingly. Likewise, names and channels of input modules can be identified
and renamed in the same way.

We strongly advise to give channels and modules meaningful names (based on
their location and/or function for instance). This will make it easy to find the
right modules and channels in Velbuslink when creating actions. It will also
facilitate understanding the Velbuslink project if modifications need to be
made later on.

Synchronising your project with your installation at this stage will write the
channel names to the modules. To do so, c

lick on the “Synchronize” button

and then on “Write”.

«
...
37
38
39
40
41
...
»

Содержание VMB4RYLD







































































Отзывы:

Нет отзывов