background image

4.0. MAINTENANCE AND TROUBLESHOOTING

4.0.1. MAINTENANCE

The wheels are wiped/washed when needed with mild soapy water. 

The motor shield is wiped with a soft cloth. Do not use an abrasive 
or rough sponge or brush. The seat and back rest are cleaned by 
vaccuuming or with a brush. 

The cover is normally a polyester product for your comfort and dry 
cleaning is recommended. Washing the cover is not recommended 
due to shrinkage. 

The control box is cleaned with a damp cloth. The arm rests are 
wiped with a damp cloth and possibly warm soapy water. The arm 
rests are normally covered in leather and do not tolerate organic 
solvents.

4.0.2. TROUBLESHOOTING

Should breakdown of your VELA Blues 300 occur, please first 
check the following:

THE WHEELCHAIR CANNOT START

•    

Both friction coupling handles are in operating position, i.e. 
point lengthwise of the wheelchair

•   

The battery indicator shows that power is on

•    

The overload cutout is disengaged: Push the safety feature home. 

•    

The seat is in driving position: I.e. either positioned forwards or 

positioned backwards.

THE WHEELCHAIR DRIVES SLOWLY

•  

The seat is lowered to the lowest position 

•  

Speed selection on the control box is selected to maximum.

THE WHEELCHAIR LOOSES POWER

•  The charging apparatus is correctly connected 
•   The charging process is normal (read LED’s on the charger’s front 

panel)

•  Call an authorized service technician to check the batteries’     

   condition/age 

•  Call an authorized service technician to check the power line to 

    the batteries

CONGRATULATIONS ON YOUR PURCHASE OF  
VELA BLUES 300

VELA Blues 300 electric wheelchair is designed to ease your every-
day life. VELA has developed a wheelchair which is very compact 
so that you are able to use it indoors and it is powerful enough to 
handle the demands for light outdoor use.

VELA Blues 300 is designed for simple and logic operation. If you 
would like to learn to drive a front wheel-drive wheelchair, you can do 
this with VELA Blues 300 by simply swinging the seat around on the 
wheelchair. This provides an even tighter control of the wheelchair.
When you drive outdoors, it will often be more comfortable to steer 
the rear wheel-driven wheelchair.

Enjoy and congratulations on your VELA Blues 300.

IMPORTANT: THE POWERCHAIR MUST CHARGE 12 HOURS 
BEFORE USE.  

The user guidelines concern useful information about positioning, 
 operation, maintenance, technical data, etc. Please read this user-
manual thoroughly and store it for later use. It must always be 
 available to the user. This user manual must always accompany the 
wheelchair. 

It can also be found on VELA’s website: 

www.vela.eu

If you have any questions, please contact our customer service: 
VELA, Goeteborgvej 12, DK-9200 Aalborg SV, Denmark. 
Tel. +45 9634 7600. 

SAFETY

This chair bears the CE mark and conforms to all applicalbe EU rules. 

RECYCLING

Some of the chair’s material can be recycled. Deliver the chair to VELA 
or to your local recycling installation. Batteries and electronic parts 
must be delivered to VELA or to your local recycling installation.

VELA reserves the right to make amendments. 

5

20

The friction coupling handle

Overload cutout

Содержание Blues 300

























Отзывы: