Veit Brisay BRI-7570/101 FPD, Инструкция по эксплуатации

Страница: 26 / 72

Unloading and transport to the place of installation
22 BRI-7570_020 14.02.11
Overseas shipment
In case of overseas shipment, the machine will be welded into
a plastic sheet and covered with a drying agent. The machine
will be shipped in a sea freight transport container.
The drying agent is designed for a storage of 3 months and has
to be renewed if the machine is stored for longer time.
Note Transport insurance
On prior consultation, a transport insurance may be effected
before shipment.
Storage conditions
A closed and dry room with a room temperature b5 °C
and +45 °C.
The packing of the machine and the spare or return parts is
designed for a storage of 3 months upon delivery.
4.2. UNLOADING AND TRANSPORT TO THE PLACE OF
INSTALLATION
Make sure that the lifting device is designed for the weight of
the machine. Chains, ropes, hooks, lifting points and cross
members have to be designed for the weight of the machine as
well.
Should suitable lifting devices not be not available, a transport
company has to be engaged with unloading and transporting
the machine.
Pay attention to the machine’s centre of gravity (see page 24,
Ill. 4).
Heating plates must be closed and securing devices must be
fastened before transporting the machine (see page 28, Ill. 7,
Pos. 2).
Avoid shocks and pay attention to hoses on the floor since
there is a
risk of injury and machine damages .
It is forbidden to stay under suspended loads!