30
FOCUS FAR button again is to escape.
FOCUS FAR button again is to escape.
AUTO SCAN SET
START ANGLE : XXX.X.XX.X
END ANGLE : XXX.X.XX.X
DIRECTION : CW
ENDLESS
: OFF
SPEED : 10
°
/S
DWELL TIME : 03
SAVE AND EXIT
EXIT
The default setting is OFF.
default setting is 10û/S.
The default setting is 03 seconds.
Veilux Model # VP-58CND12X User Manual
OSD MENU SETTING
E. AUTO SCAN SET
DEFAULT SETTING
E-1. AUTO SCAN - START ANGLE
To set the start position, press FOCUS FAR button then move the dome to the required start
position. Press
E-2. AUTO SCAN - END ANGLE
To set the end position, press FOCUS FAR button then move the dome to the required end
position. Press
E-3. AUTO SCAN - DIRECTION
Auto Scan directions are available as CW or CCW.
● CW: Clock wise direction (Default)
● CCW: Count Clock Wise Direction.
E-4. AUTO SCAN - ENDLESS
Auto Scan can be set to endless rotation by enabling the endless option.
E-5. AUTO SCAN - SPEED
Auto scan speed can be programmed from 05û/S up to 35û/S.
The
E-6. AUTO SCAN - DWELL TIME
The dwell time at the start and end points can be programmed from 1 second to 30 seconds.
E-7. AUTO SCAN - SAVE AND EXIT
To save the memorized data and escape this page, move the joystick right or press the pan
right key when the cursor is at SAVE AND EXIT.
E-8. AUTO SCAN - EXIT
To escape this page, move the joystick right or press the pan right key.
Website:
www.Veilux.net
Phone # 1-800-510-6528
* 66 + pre-
set
button is working as AUTO SCAN after set-
ting.
