Veichi AC310, Руководство по обслуживанию

Страница: 39 / 63

38
AC310 Universal AC Drive Service Manual
3.4.2 Analogue Output Signal
（
AO1
,
AO2
） :
Voltage 0-10V; Current
4-20mA ,0-20mA
;
Frequency Signal 0-50KHZ
⚫ Test the output voltage: DIP switch to A01 or AO2 voltage ON terminal, at this time
parameter setting F03.37=0, F03.38=1, check C00.20 or C00.21, then press the start button,
there will be voltage from 0-10V (after parameter setting or use multimeter DC gear, measure
+10V).
F03.38=1, check C00.20 or C00.21, then press the start button, there will be a voltage
from 0-10V (after the parameters are set up or use a multimeter DC gear, measure the voltage
b10V and GND, the operation will be from 0V to 10V). Figure 3 (Run to maximum