Mini VAG505A/VAG506M/VAG506/V801
8
Figure 2.1
2.2
Select System
With the scan tool in
System
screen (Figure 2.1), use
UP/DOWN
scroll
button to select the detecting system, and press
ENTER
.
Figure 2.2
2.3 connect with the
vehicle’s ECU
If the scan tool fails to communicate with the vehicle’s ECU
(Engine Control Unit), a “Fail to connect” message shows up
on the display.
Verify that the ignition is ON.
Check if the scan tool’s OBD II connector is securely connected to
the vehicle’s DLC.
Verify that the module is supported.
Turn the ignition off and wait for about 10 seconds. Turn the ignite on
back to on and repeat the procedure from step 2.3
