background image

4

1 About this document

VEGATOR 636 Ex • Signal conditioning instrument

23446-EN-130627

1  About this document

1.1  Function

This operating instructions manual provides all the information you 

need for mounting, connection and setup as well as important instruc

-

tions for maintenance and fault rectification. Please read this informa-

tion before putting the instrument into operation and keep this manual 

accessible in the immediate vicinity of the device.

1.2  Target group

This operating instructions manual is directed to trained specialist 

personnel. The contents of this manual should be made available to 

these personnel and put into practice by them.

1.3  Symbolism used

Information, tip, note

This symbol indicates helpful additional information.

Caution:

 If this warning is ignored, faults or malfunctions can result.

Warning:

 If this warning is ignored, injury to persons and/or serious 

damage to the instrument can result.

Danger:

 If this warning is ignored, serious injury to persons and/or 

destruction of the instrument can result.

Ex applications

This symbol indicates special instructions for Ex applications.

• 

List

The dot set in front indicates a list with no implied sequence.

→ 

Action

This arrow indicates a single action.

1  Sequence of actions

Numbers set in front indicate successive steps in a procedure.

Battery disposal

This symbol indicates special information about the disposal of bat

-

teries and accumulators.

Содержание VEGATOR 636 Ex





























Отзывы: