Vega VEGASWING 63 Скачать руководство пользователя страница 6

Страница: 6 / 48

2 For your safety

VEGASWING 63 • Two-wire 8/16 mA

29232-EN-180704

reasons, only the accessory specified by the manufacturer must be

used.
To avoid any danger, the safety approval markings and safety tips on

the device must also be observed and their meaning read in this oper-

ating instructions manual.

2.5 Safety label on the instrument

The safety approval markings and safety tips on the device must be

observed.

2.6 EU conformity

The device fulfils the legal requirements of the applicable EU direc-

tives. By affixing the CE marking, we confirm the conformity of the

instrument with these directives.
You can find the EU conformity declaration on our website under

www.vega.com/downloads.

2.7 SIL conformity

VEGASWING 63 fulfills the requirements of functional safety accord-

ing to IEC 61508 resp. IEC 61511. You can find further information in

the Safety Manual "

VEGASWING series 60

2.8 Installation and operation in the USA and

Canada

This information is only valid for USA and Canada. Hence the follow-

ing text is only available in the English language.
Installations in the US shall comply with the relevant requirements of

the National Electrical Code (ANSI/NFPA 70).
Installations in Canada shall comply with the relevant requirements of

the Canadian Electrical Code.

2.9 Safety instructions for Ex areas

Please note the Ex-specific safety information for installation and op-

eration in Ex areas. These safety instructions are part of the operating

instructions manual and come with the Ex-approved instruments.

2.10 Environmental instructions

Protection of the environment is one of our most important duties.

That is why we have introduced an environment management system

with the goal of continuously improving company environmental pro-

tection. The environment management system is certified according

to DIN EN ISO 14001.
Please help us fulfil this obligation by observing the environmental

instructions in this manual:

•

Chapter "

Packaging, transport and storage

•

Chapter "

Disposal

Содержание VEGASWING 63

















































Результаты поиска

Содержание VEGASWING 63

Отзывы:

Похожие инструкции для VEGASWING 63

Бренды по названию

Популярные бренды

Vega VEGASWING 63, Руководство по эксплуатации

Результаты поиска

Содержание VEGASWING 63

Отзывы:

Похожие инструкции для VEGASWING 63

Бренды по названию

Популярные бренды