31
5 Mounting
VEGAPULS 6X • Two-wire 4 … 20 mA/HART
66190-EN-221107
2. Insert the disc springs as described above
1
2
Fig. 28: Use of disc springs
1 Disc
spring
2 Sealing
surface
3. Tighten screws with the necessary torque (see chapter "
Techni-
cal data
", "
Torques
")
Note:
We recommend retightening the screws at regular intervals depend-
ing on the process pressure and temperature. This will maintain the
sealing properties of the antenna encapsulation against the process.
PTFE threaded adapters are available for VEGAPULS 6X with thread
G1½ resp. 1½ NPT. Due to this, only PTFE is in contact with the
medium.
1
3
2
4
5
*$
*
*$
*
6:
6:
Fig. 29: VEGAPULS 6X with PTFE threaded adapter (example VEGAPULS 6X
with thread G1½)
1 Sensor
2 O-ring seal (sensor side)
3 PTFE threaded adapter
4 Flat seal (process side)
5 Welded
socket
Mounting, PTFE threaded
adapter
