33
6 Set up with the display and adjustment module PLICSCOM
VEGACAL 66 • Foundation Fieldbus
30038-EN-200929
Simulation
Start simulation?
Basic adjustment
If the function "
Reset
" is carried out, the sensor resets all settings to
default.
The following values will be reset:
Function
Reset value
Max. adjustment
3000 pF
Min. adjustment
0 pF
Damping ti
0 s
Linearisation
Linear
Sensor-TAG
Sensor
Display
AI-Out 1
Special parameters
All special parameters are reset to delivery status.
Peak value indicator
The min. and max. values are reset to the actual value.
The sensor is already set to the ordered national language. In this
menu item you can change the language. The following languages are
available as of software version 3.50:
•
Deutsch
•
English
•
Français
•
Espanõl
•
Pycckuu
•
Italiano
•
Netherlands
•
Japanese
•
Chinese
Language
German
With this function
•
Load parameter adjustment data from the sensor into the display
and adjustment module
•
Write parameter adjustment data from the display and adjustment
module into the sensor
The data are permanently saved in an EEPROM memory in the dis-
play and adjustment module and remain there even in case of power
Reset
Service - Language
Copy sensor data
