Vega VEGACAL 60 Series, Руководство по эксплуатации

Страница: 8 / 16

8
4 Mounting
Electronics module • VEGACAL series 60
30531-EN-170531
2
1
Fig. 3: Loosen the holding screws
1 Electronics module
2 Screws (2 pcs.)
5. Pull the previous electronics out with the opening levers.
6. Insert the new electronics module carefully.
7. Screw in the two holding screws and tighten them
8. Connect the connection cables according to the operating in-
structions manual of the respective sensor
9. Screw the housing lid back on
The electronics exchange is now finished.
As a rule, an exchange of electronics must be documented internally
if Ex applications are involved.