VEGA SI-13/User Manual
22
Revision 08 – 04 May 2018
“VEGA SI-13” TAB
The “Vega SI-13” tab contains the settings of the connected device.
Current state
– displays the current parameters of the device - the number of counted
pulses at the inputs and the temperature.
Input settings
– allow you to change the operation of the pulse inputs from the
counting of pulses to the security mode and back. When transferring the input to the security
mode, the device will send an alarm packet to the network (See part 5, packet 2) whenever this
input is closed. The maximum possible frequency of sending alarm packets is one per 10
seconds.
Interface settings
– RS-232 or RS-485 interface settings depending on the type of the
connected device.