Vega SH-2 / User Manual
11
Revision 02
–
INITIAL STARTUP
The SH-2 modem can be powered from either an external power source or built-in
battery. To operate from the built-in battery, you must connect the battery connector to the
one of power connectors on the board which XP7 or XP6 marked. In case of operation with
two batteries you should to use the both connectors.
The modem can operate through one of two technologies - LoRaWAN or LTE NB-IoT
what is choose via the “Vega LoRaWAN Configurator” application (see part 4).
LORAWAN TECHNOLOGY OPERATION
The modem supports two activation methods in the LoRaWAN network - ABP and
OTAA.
Select one of the methods using “
Vega LoRaWAN Configurator
” application (See part
4).
1. ABP. After power supply connection, the device immediately begins to operate in the
"Active" mode.
2. OTAA. After pressing the start button, the device makes three attempts to connect to
the network within the set frequency plan. After the activation in the LoRaWAN network is
confirmed, the device sends a signal (LED flashing for 3 seconds) and switches to the "Active"
mode. If all attempts fail, the converter will continue to accumulate data and will attempt to
connect to the network every 24 hours.
Connectors for
batteries
