Vega PT30E.SV, Руководство по эксплуатации

Страница: 5 / 28

5
3 Product description
Electronics module • SOLITRAC, MINITRAC, POINTRAC, WEIGHTRAC
40104-EN-210107
3 Product description
3.1 Configuration
This operating instructions manual applies to the electronics modules
of the following sensors from the PROTRAC series.
•
SOLITRAC
•
MINITRAC
•
POINTRAC
•
WEIGHTRAC
The scope of delivery encompasses:
•
Electronics module
•
Optical pad
•
Plastic spatula
•
Special grease for optical pad (tube 5 ml)
•
Coded pins for mounting support (2 pcs.)
•
Documentation
– This operating instructions manual
3.2 Principle of operation
The electronics module is suitable for exchange in sensors of the
PROTRAC series. You can find information of the available versions in
chapter " Mounting preparations ".
3.3 Packaging, transport and storage
Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
based on ISO 4180.
The packaging consists of environment-friendly, recyclable card-
board. For special versions, PE foam or PE foil is also used. Dispose
of the packaging material via specialised recycling companies.
Transport must be carried out in due consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or con-
cealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
Scope of this operating
instructions
Scope of delivery
Application area
Packaging
Transport
Transport inspection
Storage