Vega TP-11 / User Manual
12
Revision 09 – 08 April 2020
INITIAL STARTUP
Vega TP-11 can be powered from either an external power source or built-in battery.
To operate from the built-in battery, you must connect the battery connector to the power
connector on the board.
The converter supports two activation methods in the LoRaWAN network - ABP and
OTAA. Select one of the methods using “Vega LoRaWAN Configurator” application (See part
4).
1. ABP. After pressing the start button, the device immediately starts working in the
"Active" mode.
2. OTAA. After pressing the start button, the device makes three attempts to connect to
the network within the set frequency band. After the activation in the LoRaWAN network is
confirmed, the device sends a signal (LED flashing for 5 seconds) and switches to the "Active"
mode. If all attempts fail, the converter became to the “Storage” mode.
Battery connector
Press the start
button located on
the board
