Vega TP-11 / User Manual
Revision 09
–
13
To transfer the device from the "Active" mode to the "Storage" mode, you can use the
long press of the start button (more than 5 seconds).
Before connecting the device to the network, make sure that its
registration data is entered in the network - Device EUI, Application EUI
and Application Key for OTAA, or Device address, Application session key
and Network session key for ABP
EXTERNAL DEVICES CONNECTION
The actuators are connected to the converter via outputs OUT_1 and OUT_2, which
are of the open-drain type.
Permissible load for each digital output is 200 mА
To increase the load on the device outputs, it is necessary to use an external relay. The
relay connection scheme is shown below.
