Vega BS / User Manual
17
Revision 26 of 13 April 2022
4 CONFIGURING OF THE GATEWAY WITH WEB-INTERFACE
INTERFACE LAUNCH – THE OPERATION BEGINING
If gateway is made after the 1
st
December 2019, then it has a pre-install Web-
interface – see description in part 4, also it still has an option of configuring
via terminal program – see part 5.
If gateway was made early, then it has not a Web-interface, but you still can
configure it via terminal program – see part 5 – or make a request for ‘how to
install the gateway Web-interface’ manual.
Web-interface software consist of two parts:
1. Server’s API “BS-Dashboard” which (in depending on received data) transmits current
settings, device information and saved new settings at the device memory. API «BS-
Dashboard» is available on the port 3001 by default.
2. Client’s Web-application operating with server’s API “BS-Dashboard” – is developed
for visual displaying data, for validation of changes and for sending the settings to save at the
device. Client’s Web-application is available on the port 80.
“BS-Dashboard” launched by the pressing the button BT1 on the gateway board. It may
be changed in the settings. After holding the button in a pressed state during more than 6
seconds the launch begins, which may be continuing about 1 or 2 minutes in depending on the
device loading.
For entering to a client’s web-application IP-address of the gateway is needed. You can
find out it with terminal program (for example, with a free PuTTY program). Part 5 describes in
detail how to connect to a gateway with a terminal program. You should enter the command
ifconfig in terminal window.
