Upstream and Downstream -
The following parameters are adjustable;
Data rate (maximum)
Data rate (minimum)
SNR target: Signal to Noise Ratio
SNR (maximum)
SNR (minimum)
INP (minimum) - Impulse Noise Protection value
BX100V CO Setup - INP Editor
Note:
Impulse Noise Protection (INP):
Electrical appliances and installations at customer premises often generate short bursts of noise of relatively
high amplitude. These bursts, called impulse noise, are electromagnetically coupled into the digital subscriber
line, degrading performance and in some cases disrupting service. The ADSL2/+ standard introduced a
parameter called Impulse Noise Protection (INP), that allows operators to select the maximum impulse length
that the DSL system can correct.
BX100A/V e-Manual D07-00-001 Rev E01
Page 19 of 52
