VeEX MX100 Series Скачать руководство пользователя страница 65

Страница: 65 / 115

7.3.2.4 Saving Throughput (Multiple Streams) Results

Only once the test has been stopped, can the results be saved by pressing the save function key on the VePAL’s keypad

If the measurement is not stopped, a pop-up message will appear warning the user.

The test results are saved and named automatically. Once saved, the user may view or rename the results file by going to

the Explorer tab located in the Files menu.

Throughput Results - Storage

Warning

Stored Throughput Results - File Explorer

Go back to top

7.4 Monitor Mode (Pass Through)

Overview:

Pass through monitor mode enables the test set to be used for long term in-service testing. This allows for

bidirectional non-obtrusive monitoring of up to full gigabit Ethernet line rate on the two 1000Base-X ports or the two 10/100/1000T

ports.

MX100/120 e-Manual D07-00-004 Rev A04

Page 65 of 115

Содержание MX100 Series




















































































































Результаты поиска

Содержание MX100 Series

Отзывы:

Похожие инструкции для MX100 Series

Бренды по названию

Популярные бренды

VeEX MX100 Series, Электронное руководство

Результаты поиска

Содержание MX100 Series

Отзывы:

Похожие инструкции для MX100 Series

Бренды по названию

Популярные бренды