FX86 CWDM Quad Laser Source User Manual
Page 10 of 17
5.2 Instrument Settings
To properly save the date/time with your measurement results, you must set the device date
and time to your local date/time. To set the date and time:
1. Power ON the test unit by pressing and holding the
Power
button for 3 seconds. The green
LED light turns on to indicate the unit is on.
2. Press
Shift/Enter + Down
to enter the Settings mode. The following parameters can be
set: Auto Shutdown mode, Time and Date. The current selected test parameter available to
edit will be flashing.
3. Press
Up
and
Down
to change the parameter.
4. Press
MODE
to select the next field to edit, then change the value if necessary by pressing
Up and Down.
5. Press
Shift/Enter
to save the date and time settings.
FX86 Instrument Setting screen
5.3 Resetting your FX86
To reset your device:
1. Disconnect external power supply from the device;
2. With the device OFF, press the red
Power
button and hold it for at least 15 seconds. The
FX86 will reboot, but you will need to reset the date and time (see above).
