FX80 / FX81 PON Optical Power Meters User Manual
Page
37
of
50
8.2
Transferring Measurement Results to a PC
To create a report, first transfer test results to a Windows PC using LTSync software. This
can be done using a micro-USB cable or via optional Bluetooth connection.
To transfer the measurement results via the micro-USB cable, install the USB
driver (see
Section
Installing the FX-8x USB Driver
). For Bluetooth transfer,
no driver is needed
.
8.2.1 Transfer Results Using Micro-USB Cable
To transfer measurement results to the PC using the micro-USB cable, connect the provided cable to a
compatible power meter and to the PC. The figure below shows that a device is connected and the unique
product ID.
FX80 is connected to PC in LTSync, its serial number is recognized by the program
