FX80 / FX81 PON Optical Power Meters User Manual
Page
5
of
50
2.0
Safety Information
Safety precautions should be observed during all phases of operation of this instrument. The
instrument has been designed to ensure safe operation however please observe all safety
markings and instructions. Do not operate the instrument in the presence of flammable gases or
fumes or any other combustible environment. VeEX Inc. assumes no liability for the customer's
failure to comply with safety precautions and requirements.
Optical Connectors
Make sure that optical sources are inactive before connecting fiber to the test set to avoid skin
or eye damage, or damage to the unit. It is recommended to:
•
Deactivate the laser before connecting or disconnecting optical cables or patchcords.
•
Never look directly into an optica
l patchcord or an optical interface (e.g. CFP, CFP2, CFP4,
QSFP+, SFP+, SFP, OTDR, LS, VFL) while the laser is enabled. Even though optical
transceivers are typically fitted with Class 1 lasers, which are considered eye safe, optical
radiation for an extended period can cause irreparable damage to the eyes.
•
Never use a fiber microscope to check the optical connectors when the laser source is active.
The operator is assumed to have received basic training in fiber optics and related testing and
measurement practices.
