Veet Infini'Silk PRO, Руководство пользователя

Страница: 74 / 80

english
74
Hair reduction apparatus
Control panel
Flash button
Lamp cartridge
Skin color sensor
Treatment panel
Control panel
Power/pause button
Indicator light to standby mode
Operating indicator light
Intensity level setting buttons
Indicator lights for intensity level
Indicator lights for changing cartridge
Indicator lights for warning systems
Indicator lights for skin tone warnings
Indicator lights for ready mode
Performing treatments with Veet ® Infini’Silk TM Pro in the correct manner!
5. Select the treatment area that haven’t been exposed to sun in the last four weeks.
6. The treatment areas should be shaved, clean, dry and free of any kinds of products such as talc (or any
other powder), deodorant or any other products against perspiration. Do not pluck the hair with wax,
by pulling it out or with tweezers before using the Veet
®
Infini’Silk
TM
Pro device. Shaving is an important
stage in receiving the desired results!
7. Press the power/pause button. The operating mode indicator light (orange) will turn on and the device
will begin to make a blowing sound (similar to the sound of a hair dryer).
8. About 3.5 seconds after pressing the power/pause button, the two indicator lights will light up to ready
mode (green). The device is now ready to produce the first light flash at the lowest intensity level.
9. Before each treatment, select the requested intensity level. Veet
®
Infini’Silk
TM
Pro offers five levels of
intensity, from 1 (the lowest) to 5 (the highest). In order to select the appropriate intensity level for the
first treatment, perform a separate test for each area. For the first treatment, it is recommended to use
the lowest intensity. The energy intensity is in the intensity of the flashes of light rays that radiate on the
skin during use. The range varies from the weakest intensity to the strongest intensity. The sliders on the
control panel shows the energy intensity to which the device is set. The stronger the energy intensity,
such the results of hair reduction are better but so does the risk of side effects increase. When you start
using Veet Infini’Silk™, always begin with the weakest intensity level!
Only after using Veet Infini’Silk™ at the weakest intensity, if you felt slight discomfort or you didn’t feel
any discomfort at all, the next time that you use Veet ® Infini’Silk TM you can increase the intensity by one
level – one additional slider. If you felt slight discomfort or you didn’t feel any discomfort at all – it is
possible to increase the intensity level gradually between each treatment.
Additional warnings!
Do not use Veet
®
Infini’Silk
TM
on the same section of skin for more than one treatment!
Skin test
● ●
Set the device to intensity level 1, press the treatment panel against the skin and press the button in
order to release one flash. If you did not feel an abnormal discomfort press one press on the button
“+” and the release another flash on another spot, this time at intensity level 2.
● ●
Continue testing as you increase the intensity level each time, until you have reached the highest
level that you feel comfortable with. Afterwards, wait one hour. If an hour pass and you still do not
experience any adverse effects, you can start your full treatment at the selected intensity.
● ●
Repeat this test for each body part you intend to treat.