Veet Infini'Silk PRO, Руководство пользователя

Страница: 73 / 80

english
73
10. Set the intensity level. If you wish to change the intensity level settings, press the intensity setting buttons
“-” / “+” in order to increase or decrease it until setting the requested intensity, so that it is possible to
see in the indicating light the level of intensity (for details see “intensity settings” in this manual).
11. Press the treatment panel against the skin, after you have ensured that the skin is even and smooth.
When the treatment panel is in full contact with the skin, the ready mode indicator light will start
to blink.
12. Press the blinking button. The device will first start a test for skin color. If the skin color is light enough
for use, the device will release a flash of light into the skin, and the ready mode indicator light will switch
off. You will be able to see a strong flash of light and at the same time a gentle popping sound will be
heard, which is the sound the device makes when it is operating. You will sense a light warm and stinging
sensation. The device will immediately charge itself for the next flash. After 1.5-3.5 seconds the indicator
lights will light up again to ready mode.
13. Lift the treatment panel from the region of skin that has undergone treatment.
14. Move the treatment panel to another region of the skin. Be guided by the pressure signs that the device
temporarily leaves in order to correctly place the panel for the next flash, in a way that avoids gaps and
overlaps are between the flashes or you can hold on to the blinking button and glide throughout the
treatment.
Avoid overlapping flashes!
Warning: Do not treat the same area of skin more than once per hair reduction session!
Treating the same area of skin more than once per session increases the likelihood of side
effects.
15. Repeat the process until the entire area is treated, whilst avoiding overlapping flashes.
If your skin burns or blisters – stop use immediately and seek medical advice!