Operating
Restraint Buckles
To attach buckle, slide clips into center until you hear a “click”.
To release buckle, press center button to disengage.
04.
Operating On
Push & Push-Along Modes
Release handle bar by wrapping fingers around both sides of release
mechanism and pulling up (fig 1). Push handle bar up until it clicks into
locked vertical position and push or push-along (fig 2 and 3).
05.
Brake
Adjustment
Inspect brake pin extension/retraction. Brake pin should be flush
to wheel mount when unlocked and extend 8-11mm (0.3-0.4 inches)
when brake pedal is in the locked position. If required, rotate brake
adjuster on bottom of Cruiser near brake pin as required (fig 2).
03.
Fig 1
Fig 2
Fig 1
Fig 2
Fig 3
