background image

2. 

Cleaning &

General

Maintenance 

WARNING:

NEVER LEAVE CHILDREN UNATTENDED. FAILURE TO 

FOLLOW THESE WARNINGS AND INSTRUCTIONS COULD 

RESULT IN SERIOUS INJURY OR DEATH:

 

•  TO PREVENT INJURY, CHILDREN MUST REMAIN SEATED WITH THEIR 

ARMS AND LEGS INSIDE THE VEER CRUISER WHILE RIDING.

•  THIS CRUISER SEATS UP TO TWO PASSENGERS. EACH SEAT IS 

SUITABLE FROM BIRTH (WITH INFANT CAR SEAT ATTACHED) UP TO 55 

LBS (25 KG) AND 45 IN (114 CM). 

•  MAXIMUM CARRYING CAPACITY OF EACH SIDE POCKET IS 2 LBS (.9 KG). 

•  MAXIMUM CUP HOLDER WEIGHT IS 2 LBS (.9 KG). EXCESSIVE WEIGHT 

MAY CAUSE A HAZARDOUS, UNSTABLE CONDITION TO EXIST. DO NOT 

PLACE HOT LIQUIDS IN HOLDER. 

•  TOTAL WEIGHT LOAD RECOMMENDED FOR THIS CRUISER IS 118 LBS (54 

KG). 

•  UNIT MAY BECOME UNSTABLE IF MANUFACTURER’S RECOMMENDED 

LOAD IS EXCEEDED, OR IF PARCEL BAG OR ACCESSORY OTHER THAN 

THAT RECOMMENDED BY THE MANUFACTURER IS USED OR HUNG FROM 

THE UNIT. 

•   NEVER PARK VEER CRUISER ON A HILL WITH CHILDREN INSIDE.

•  THE BRAKE MUST BE LOCKED WHILE TAKING THE CHILD OR CHILDREN 

IN OR OUT OF THE VEER CRUISER. 

•  ALWAYS MAKE SURE VEER CRUISER IS FULLY OPEN AND LOCKED 

BEFORE USE. 

•   VEER CRUISER SHOULD NEVER BE USED WHILE ASCENDING OR 

DESCENDING STAIRS,  OR USING AN ESCALATOR. 

•   DO NOT MAKE ANY ALTERATIONS OR MODIFICATIONS TO THE VEER 

CRUISER WITH PRODUCTS NOT SUPPLIED BY THE MANUFACTURER, AS 

THIS MAY CAUSE INSTABILITY OR STRUCTURAL DAMAGE NOT COVERED 

UNDER WARRANTY. 

•  TO AVOID SERIOUS INJURY FROM FALLING OR SLIDING OUT, PASSEN-

GERS MUST ALWAYS BE SEATED WHILE VEER IS IN USE, AND SHOULD 

ALWAYS USE COMPLETE 3-POINT HARNESS. 

•  DO NOT USE VEER CRUISER WITHOUT REAR WHEEL SAFETY FENDERS 

IN PLACE AND ALWAYS KEEP HANDS AWAY FROM MOVING WHEELS.

•  ALWAYS KEEP FINGERS AWAY FROM MOVING PARTS WHEN FOLDING, 

UNFOLDING, OR ADJUSTING THE CRUISER TO PREVENT ENTRAPMENT 

OR PINCHING. 

•  DO NOT SIT OR STAND ON THE SIDE WALL PANELS OF THE CRUISER.

•   DO NOT SIT OR STAND ON THE FOLDED SEAT BACKS OF THE CRUISER.

•   CLIMB CURBS IN PULL MODE.  DO NOT ATTEMPT TO PUSH ONTO 

CURBS.

THIS PRODUCT IS DESIGNED AND MANUFACTURED TO COMPLY WITH 

ASTM F833 STANDARD CONSUMER SAFETY PERFORMANCE 

SPECIFICATION FOR CARRIAGES/BUGGIES AND IS JPMA CERTIFIED.

Store your VEER Cruiser in a location that is out of direct sunlight and 

environmental elements.

Frame, seats, handle grips, fenders and wheels:

Wipe with a damp cloth and a mild detergent and dry thoroughly. 

DO NOT use abrasives.  

Soft sided panels: 

Wipe with a damp cloth and a mild detergent and dry thoroughly. 

DO NOT use abrasives. Panels may also be removed for hand washing 

in cold water with mild detergent. Dry flat and away from direct 

sunlight before re-use or storage. DO NOT bleach, iron or dry clean. 

Snack tray and cup holders: 

Wash in a sink or with a hose, or wipe with a damp cloth and a mild 

detergent and dry thoroughly. DO NOT use abrasives. 

Harness straps:

Remove and hand wash in cold water with mild detergent. Dry flat 

and away from direct sunlight before re-use or storage. 

DO NOT bleach, iron or dry clean. 

•   If the VEER Cruiser chassis parts have been exposed to salt water, 

we  recommend that they be rinsed with fresh (tap) water as soon as 

possible to avoid corrosion. 

•   If your VEER Cruiser has been exposed to sand, use a soft brush to

gently brush sand from Cruiser parts and cycle the components until 

the sand is ejected and the components cycle freely.

•   If your Cruiser is in need of an all over wash, remove accessories 

and rinse with hose. Allow to completely air dry.  

•   NEVER use a power washer on your VEER Cruiser.

Содержание CRUISER











Отзывы: