Special Mag Probe Installation Kits
Riser Cap Kit for Mag Probe Installations
15
Riser Cap Kit for Mag Probe Installations
The cap on the riser containing the Mag Probe must be modified to allow the probe’s cable to exit the riser. This
modification requires making a 1/2”-14 NPT tapped hole in the cap for a cord grip. Two types of drilled and
tapped Riser Cap kits are available for purchase, or you may be able to modify the existing riser cap.
CAP AND CORD GRIP KIT
This Riser Cap kit (Table 2) contains a plastic cap which screws onto the 4-inch NPT riser (Figure 9). The cap
comes drilled and tapped with a cord grip.
Figure 9. Cap and Cord Grip Kit
Table 2. Cap and cord grip kit - Part No. 330020-282
Quantity
Description
Part Number
1
Plastic Riser Cap
331106-001
1
Gasket
331140-001
1
Bushing - Cord Grip
330787-001
1
Nut - Cord Grip
330594-001
Legend for numbered boxes
1
Cord grip nut
2
Cord grip bushing
3
Riser cap and gasket
tls2\risercap.eps
1
2
3
