Veeder-Root TLS2, Руководство по модернизации

Страница: 10 / 13

Installation of Upgrade Kit Safety Precautions
7
Figure 5. Attaching the display to the CPU board
983-5.eps
1
3
3
2
3
3
1 Get the four T-10 s crew s , s pacer s and wa s her s you
s aved when removing the di s play from the old CPU
board (item s 1 and 2 in Figure 2).
2 Get the di s play and attach it s 2-wire cable plug to the
connector on the CPU board (item 1 in Figure 5).
3 Push the display’s ribbon cable into its connector on
the CPU board (item 2
in Figure 5 ).
4 Position the display over the standoffs (item 3 in
Figure 5 ) and replace the 4 screws and 2 spacers
(used under right side display attaching screws only -
see plastic spacers (item 4 in photo at right).
4
4