XSTREAM 2.4 GHZ WIRELESS MODEM
For use with VEEDER-ROOT EMR³ DATALINK
INSTALLATION INSTRUCTIONS
Manual 577013-894, Rev. B
Page 11 of 14
OPTIONAL KEYPAD INSTALLATION
:
In order to install the optional Keypad, the Display will need to be disconnected from the wiring
and gently removed from the housing.
1. Remove the cover from the hole in the right side of the display head housing.
2. Put the rubber gasket over the threads on the keypad outlet.
3. Align the gasket and keypad to the holes in the housing and with a T-15 Torx, secure the
keypad to the housing with the screws provided.
4. Insert the display in the housing, gently pushing down to seat completely.
5. Reconnect the wires to the display per the following wiring information:
