Appendix A
TLS-450PLUS Setup For IQ Control Box Monitoring
A-13
TLS-450PLUS Setup For IQ Control Box Monitoring
Restore all power to the IQ Control Boxes and the TLS-450PLUS.
Serial Port Setup
1. At the TLS-450PLUS display touch
Menu>Setup>Communication>Serial Port
(see Figure A-11).
Figure A-11. RJ IQ Comms Setup Screen
2. Select the serial port setup sequence for each standalone/loop of sites RJ Control Boxes.
3. In the ‘Usage’ field, choose ‘RJ IQ Comms’.
4. Enter a label for this port, e.g., Unleaded tanks 1 - 4.
5. Grayed out fields are not changeable.
6. Select the Enabled radio button.
7. Continue to the next RS-485 port if necessary.
Pump Controller Setup
1. At the TLS-450PLUS display touch
Menu>Setup>Pumps and Lines>Pump Controller
and select Pump
Cntlr #1 (see Figure A-12).