Veeder-Root 8601 Series, Руководство по подготовке площадки для сертификации

Страница: 33 / 41

Appendix B Datalogger Site Connection and Initialization
B-5
6. On the laptop, open an internet browser and enter the IP address https://169.254.21.12/GeneralSetup in
the browser’s address bar. When the login page displays, enter ‘guest’ for both User name and Password.
NOTE: The Datalogger simultaneously runs two applications; one programs the general communication proto-
cols (GeneralSetup), and the other programs how the Datalogger gathers its information (DLSetup). Pressing
the blue arrow at the top middle of the screen will toggle you between the two programs (see Figure B-4). Af-
ter entering selections/changes to fields on any page, click the Save button to save your entries, or Cancel to
discard them. Programming screens used to setup the Datalogger are listed in Table B-2.
7. On the “Communication Setup” page (see Figure B-4), click on “Ethernet Port Setup” (1) and select the
Device type “ETH 1” (2) from the drop-down menu. In the IP Address Type field (3):
If the site is using a static IP address, select “Static IP”; and enter the IP address assigned by your network
administrator. Once this is complete, click the “Save” button to keep these settings (see example in Figure B-
4).
If the site is using a dynamic IP address, select “Dynamic IP” (the remaining parameters will auto-fill once the
Datalogger is reconnected to the site network). Click “Save” (4) to accept your entries.
NOTE: If you receive an error message after clicking “Save”, click “OK” and refresh the page.
Table B-2. Datalogger User Interface Screens
GeneralSetup
Application Pages
See
Example
DLSetup
Application Pages
See
Example
Communication
Setup
Ethernet Port
Setup Step 7.
System Setup
FMS Identification Step 16.
Serial Port Setup Step 8.
CDIM Setup Diag. use only ATG Commands Step 9.
TDIM Setup Step 10. DIM Commands Step 11.
Site Id Server
Setup Diag. use only
Communication Testing
FMS Heartbeat Step 19.
System Setup Hostname Step 11. ATG Step 17.
Date and Time Step 13. POS Step 18.
Units Step 14. DIM Diag. use only
Alarm Filtering Diag. use only
Diagnostics
DIM Communica-
tions Step 12.
Ping
Diag. use only
Traceroute
Software Mainte-
nance
DB Backup
DB Restore
Download New
Version
Activate/Revert
Upgrade Fea-
tures