V. Instruction for operation
1. Environment requirements:
Operation temperature range: - 10
С
÷ + 40
С
;
Storage temperature: - 25
С
÷ + 40
С
;
Permissible relative humidity: < 80%. Condense is not allowed.
2.Preparation for work and scale maintenance :
Before start using the scale, check whether the set is full. Check for mechanical damages which may
have occurred during transportation. For the right functioning of the scale it is necessary to be placed
on stable and flat surface; the four adjustable feet are used to level the scale. During the leveling watch
the mounted in the down left angle bubble-level. After turning the scale on wait 10 minutes before
starting to use it.
Attention!
1.
The scale is a precise instrument. Please, place it on flat surface and avoid serious hits. Loads over
the maximum capacity can damage the load cell permanently. Avoid operating it on vibrating surfaces
and close to sources of strong electro-magnetic fields;
2.
Keep the scale in airy and dry place; avoid leaving it under direct sunlight;
3.
Check the functionality of the display during the automatic testing of the scale after turning the
power on;
4.
Do not use chemical and abrasive dissolving agents for cleaning it. Please, clean the scale with wet
cloth but avoid letting water into it;
5.
Do not push the buttons too strongly and do not use sharp objects for this purpose.
3.Functions of the keys:
Key Function
ZERO setting
Set and remove TARE
Enter/Return to the main menu
Enter in selected sub-menu. Setting/ parameter
confirmation
Menu up
Menu down
Used in service mode
Used in service mode
