7
4. Note polarity of battery. Note which color wire is on which terminal.
5. Disconnect the wires from the battery and set the battery aside.
6. Connect the replacement battery, making sure the correct color wires are on the new
battery terminals. Make sure the polarity of battery is correct.
WARNING:
Incorrectly connected wires will damage the battery and recharge
adapter, double check battery polarity before reassembly.
CAUTION:
Incorrectly connected wires will allow the spotlight to operate normally,
however, when recharge adapters are connected, there will be damage to
the battery and recharge adapters. Double check battery polarity before
reassembly!
7. Replace handle, in one half of the housing body. Make sure wires and connectors
do not touch.
8. Place other half of housing body into position and replace screws (clockwise). Do
not overtighten.
9. Follow steps 13 through 19 for bulb replacement to reassemble reflector, rubber “O”
ring, glass, retaining ring and rubber bezel. Charge the new battery using AC
recharge adapter for a minimum of 18-20 hours initially, then 15 hours thereafter.
SAFE BATTERY DISPOSAL
Contains a maintenance-free, sealed, non-spillable, lead acid battery, which must be
disposed of properly. Recycling is required, contact your local authority for information.
Failure to comply with local, state and federal regulations can result in fines or impris-
onment.
BATTERY DISPOSAL WARNING
• Do not dispose of the battery in fire as this may result in an explosion
• Before disposing of the battery, protect exposed terminals with
heavy-duty electrical tape to prevent shorting (shorting can
result in injury or fire)
• Do not expose battery to fire or intense heat as it may explode
• For more information on recycling this battery, call toll-free
(877) 288-7722
8. SPECIFICATIONS
Spotlight Bulb ........................................12 volt, H3 series, 100 watt quartz halogen
Battery..................................................Maintenance free, sealed lead acid, 12 volt
