![background image](http://html1.mh-extra.com/html/coopers/g362/g362_instructions-for-use_2665287001.webp)
2 in 1 Solar Motion Spotlight
G362
Instructions for Use
Please read and retain these instructions for future reference
v001: 02/12/19
The lights will look great scattered along your path or flowers beds, using the ground stake provided, to light
the way at night or to illuminate your plants at night.
You can also wall mount it instead using the wall bracket and fixings provided, making it great for above your
door, garage, shed etc.
It charges by day using the integral solar panel then will automatically light up at night up at 80 lumens,
when motion is detected from up to 5 meters away it will brighten further up to 100 lumens.
After no motion is detected after around 20 seconds it will dull back down to 80 lumens.
How to use the Solar Light
Prior to initial use, the solar unit should be exposed to sunlight
for at least 8-12 hours to fully charge the battery.
Push the switch to the ON position when charging for the first
time.
Find a location in direct sunlight and generally free from cover
or shade.
Moisten ground if too compact to prevent damage to the
stake
At night the oval LED solar lights will automatically turn on.
Ideally align the solar panel to face the midday sun to
maximize charging.
ALWAYS POSITION IN DIRECT SUNLIGHT
For Domestic use only.
How the solar sensor light works
During the day, the solar panel converts solar energy and stores it in the rechargeable battery. At night,
using this stored energy, the light illuminates automatically for 15-20 seconds when the motion sensor
detects movement. After 15-20 seconds if no further motion is detected, the light will automatically turn off.
How bright the light illuminates, depends on its location, weather conditions and seasonal lighting
availability. The motion sensor detects motion over an approx. a distance of around 3-5m.
Battery Replacement
The life of the rechargeable battery is approximately 6-12 months.
Dimensions
14.8cm x7.5cm x23.5cm including stake
14.8cm x7.5cm x14cm wall light only
Specification:
Lighting mode: PIR
Battery:
3.7V 13500 500mah Li-ion
battery included
2 white SMD LEDs - not replaceable
Detection distance: 3-5m
Activation time:
15-20sec
Composition
Plastic, metal, glass