Model number SL3HE
Contact us / 1-877-571-2391
Help
Questions?
Call customer service hotline
1-877-571-2391
1M LITHIUM-ION LED
SPOTLIGHT
SAVE THIS INSTRUCTION MANUAL FOR FUTURE
REFERENCE.
© 2020 Baccus Global LLC
Boca Raton, FL 33487 (877) 571-2391
Model Number SL3HE
BC
SAFETY GUIDELINES /
DEFINITIONS
DANGER
:
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING:
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury and/or property
damage.
RISK OF UNSAFE OPERATION.
When using tools or equipment, basic safety precautions should always be followed to reduce
the risk of personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and
property damage. There are certain applications for which tools and equipment are designed. Manufacturer strongly recommends that
this product NOT be modified and/or used for any application other than for which it was designed. Read and understand all warnings
and operating instructions before using any tool or equipment.
READ ALL INSTRUCTIONS
WARNING:
Read all instructions before operating light. Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury.
IMPORTANT SAFETY
INSTRUCTIONS
INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS
WARNING!
Risk of fire, electric shock, burst hazard, or injury to persons – when using electrical appliances, basic precautions should
always be followed, including the following:
•
LED gets HOT quickly!
• Do not touch the LED at any time when operating.
• Only contact trigger when turning on.
• Do not touch hot lens or enclosure.
• Do not remain in light if skin feels warm.
• Do not operate the spotlight with a missing or damaged lens or enclosure.
WARNING!
When using electrical appliances, basic precautions should always be followed, including the following:
• The spotlight is not a toy and cannot be played with as toy. To reduce the risk of injury, close supervision is necessary when these units
are used near children.
• Use only attachments recommended or sold by the manufacturer.
WARNING!
To reduce the risk of electric shock:
• Do not put the spotlight in water or other liquid. Do not place or store this light where it can fall or be pulled into water or become wet.
• Charge indoors only. Do not expose USB charging cable to water or any other liquid.
• Do not clean this appliance with a water spray or the like.
• Use only the charging cable supplied by the manufacturer to charge and recharge.
WARNING!
Fire hazard:
• Never contact combustible material to the lens.
• Keep spotlight lamp away from materials that may burn.
CAUTION!
To reduce the risk of injury or property damage:
• All lights give off heat:
– Do not touch lens while operating.
– Keep combustibles away from spotlight lens. Extreme heat can cause fires.
– Never place the light face down on any surface when lit, charging or not in use. Never store the light face down on any surface.
• Never look directly into the light or shine the light into another person’s eyes.
• Keep sharp objects away from lens — it is glass and can break.
• Do not immerse spotlight in water.
• Do not expose this unit to extremely high temperatures.
• Do not drop or throw spotlight. It contains glass and a lithium-ion battery.
• Use only with the USB charging cable provided with the unit. Plug in the charging cable at the light first, then plug into the charging
source.
• After charging/recharging, disconnect cable and wait 5 minutes before use.
• Do not crush, cut, pull or expose charging cable to extreme heat.
• Position charging cable so they do not become entangled or become a safety hazard. Keep charging cable away from sharp edges.
• Use in a dry location only.
• There are no user-serviceable parts inside. Do not attempt to disassemble any other parts of the unit.
• To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting.
• Do not attempt to charge the unit if the charging cable is damaged – return the charging cable to manufacturer for repair or
replacement.
SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM-ION BATTERIES
WARNING!
To reduce the risk of fire, electric shock, burst hazard, or injury to persons or property:
Lithium-ion batteries are small, compact and ideal for providing long-lasting power to this unit. However, they must be used and charged
properly. Improper use can result in serious injury, fire, or death.
• Lithium-ion batteries can explode in the presence of a source of ignition. Do not use the product in the presence of an open flame.
• Do not place this lithium-ion battery powered unit in fire or apply heat to it.
• Do not subject this lithium-ion battery powered unit to strong impacts or shocks. The battery in this unit contains safety and protection
devices which, if damaged, may cause the battery to generate heat, rupture or ignite.
• Do not expose this lithium-ion battery powered unit to water or salt water, or allow the battery to get wet.
• Avoid storing this lithium-ion battery powered unit in the basement, bathroom or other areas of the house that are or may become wet
or humid or where moisture may concentrate.
• Do not leave this lithium-ion battery powered unit in direct sunlight, or use or store the unit inside cars in hot weather. Doing so may
cause the battery to generate heat, rupture, or ignite. Using the battery in this manner may also result in a loss of performance and a
shortened life expectancy.
• Never charge this unit near heat or flammable objects.
NEVER THROW WATER ON A BURNING LI-ION BATTERY!
If a lithium-ion battery does catch on fire, it will burn
even more violently if it comes in contact with water or even moisture in the air. A fire extinguisher must be used.
Battery Charging and Capacity
This unit is delivered in a partially charged state – you must fully charge it before using it for the first time.
When stored at room temperature with a full charge, Li-ion batteries will begin to discharge from the time they are manufactured, even
when unused. Deep discharges also decrease their capacity. Battery life can be extended by the following:
• Charge battery to full capacity before storage.
• Optimal storage temperature for this unit is between 5°C and 20°C (41°F and 68°F).
• Never discharge the battery fully.
• Charge after each use.
• Always charge at least once every 3-6 months if not in frequent use to prevent overdischarge.
TRANSPORTATION OF LITHIUM-ION BATTERIES
• Always check all applicable local, national, and international regulations before transporting a unit containing a Lithium-Ion battery.
• Transporting an end-of-life, damaged, or recalled battery may, in certain cases, be specifically limited or prohibited.
SAVE THESE INSTRUCTIONS
FEATURES
1
2
3
4
7
8
9
5
6
1. 5-Position On/Off Trigger (Full/High/Low/Halo/Off)
2. Pistol Grip Handle
3. Area Lights (total of 6 around the Lens)
4. Main Beam LED
5. Battery/Charge Status LED Indicator
6. Micro-USB charging port (for use with the USB
charging cable)
7. USB charging cable
8. Regular USB plug
9. Micro-USB plug
READING THE BATTERY/CHARGE
STATUS LED INDICATOR
The battery and charging status LED indicator is located on the back of the unit. It lights or flashes in three colors to indicate the following:
When charging:
Green:
Battery is in a fully charged state.
Green (flashing):
Battery is in a high partially charged state.
Orange (flashing):
Battery is in a low partially charged state.
Red (flashing):
Battery needs to be recharged.
Red (flashing rapidly):
The battery of the unit is overheated due to extensive use or recharging. The charging process will stop at
this stage and will automatically resume after a cool down period.
When operating:
Green:
Battery is operating at full voltage.
Orange:
Battery is operating at partial voltage.
Red:
Battery is operating at low voltage, and should be recharged or the built-in low voltage protection will be activated and the unit will
automatically shut down shortly.
Red (flashing rapidly):
The battery of the unit is overheated (due to extensive use or recharging), or is too cold (the ambient
temperature has dropped below -20°C). Operation will stop at this stage.
CHARGING/RECHARGING THE
SPOTLIGHT
This unit is shipped in a partially charged state. Charge unit after purchase and BEFORE first use until the battery/charge status LED
indicator lights green.
Recharge after each use until the battery/charge status LED indicator lights green.
IMPORTANT: When the unit is not in use, we recommend that the battery is charged at least every 3 to 6 months.
CAUTION!
To reduce the risk of injury or property damage:
• Never place the light face down on any surface when charging.
• Failure to keep the battery charged will cause permanent damage and result in poor performance.
CHARGING/RECHARGING USING THE USB CHARGING CABLE AND A
DEVICE WITH A USB POWER PORT (NOT SUPPLIED)
1. Make sure the spotlight is off.
2. Insert the micro-USB plug of the USB charging cable into the micro USB charging port on the back of spotlight.
3. Insert the regular USB plug of the USB charging cable into a device’s functional USB power port. The battery/charge status LED
indicator will light or flash in one of three colours (as described in the “Reading the Battery/Charge Status LED Indicator” section)
to indicate the charging status.
4. Charge until the battery/charge status LED indicator lights green.
5. When charging is complete, disconnect the USB charging cable from the device’s USB power port and the spotlight. Store the
cable in a safe place.
OPERATING THE SPOTLIGHT
The 5-Position On/Off Trigger turns the unit on and off, and is also used to choose the following modes:
FULL – all LEDs;
HIGH – Main Beam LED in its high (brightest) setting;
LOW – Main Beam LED in its low (dimmest) setting; or
HALO – 6 Area LED lights.
CAUTION!
Do not operate while charging
.
Disconnect the charging cable, then select the light mode as follows:
To turn the spotlight
on
and use the
Main Beam LED and 6 area lights at once
Press the trigger once.
To use the Main Beam LED alone in its
brightest setting
Press the trigger a second time
within 5 seconds.
To use the Main Beam LED alone in its
dimmer setting
Press the trigger a third time
within 5 seconds.
To switch the spotlight to HALO mode, using
just the 6 area LED lights
Press the trigger a fourth time
within 5 seconds.
To turn the spotlight off
Either press the trigger a fifth time within 5 seconds
OR
press the trigger once
after 5 seconds
in any mode.
Notes:
The battery/charge status LED indicator will light in one of three colors (as described in the “Reading the Battery/Charge Status LED Indicator”
section) to indicate the battery status.
If the light’s battery voltage is nearly low, the unit will switch automatically to Halo mode even if another Light Mode has been selected.
CARE AND MAINTENANCE
All batteries lose energy from self-discharge over time and more rapidly at higher temperatures. When the unit is not in use, we
recommend that the battery is charged at least every 3 to 6 months.
From time to time wipe the outside of the appliance with a soft cloth. Do not immerse the appliance in water.
There are no user-replaceable parts. Periodically inspect the condition of adapters, connectors and wires. Contact manufacturer to
replace any components that have become worn or broken.
BATTERY REPLACEMENT/DISPOSAL
BATTERY REPLACEMENT
The battery should last the service life of the unit. Service life is dependent on a number of factors including but not limited to the
number of recharge cycles, and proper care and maintenance of the battery by the end user. Contact manufacturer for any information
you may need.
SAFE BATTERY DISPOSAL
Contains a lithium-ion battery, which must be disposed of properly. Recycling is required. Failure to
comply with local, state and federal regulations can result in fines, or imprisonment.
Please recycle.
WARNINGS!
• Do not dispose of the battery in fire as this may result in an explosion.
• Before disposing of the battery, protect exposed terminals with heavy-duty electrical tape to prevent shorting (shorting can result in
injury or fire).
• Do not expose battery to fire or intense heat as it may explode.
TROUBLESHOOTING
Problem
Possible Solution
The spotlight will not
charge
• Check that the spotlight is turned off.
• Check that the USB charging cable is properly connected the spotlight and the power source. Make
sure there is good contact.
• Make sure the power source is functioning properly.
• The unit may have shut down to protect the battery from overheating after a long period of operating
or charging. Disconnect the USB charging cable from the power source and the light. Allow the light to
cool down for a period before resuming charging.
The spotlight will not
operate
• Make sure the 5-Position On/Off Trigger has been pressed to turn the spotlight on.
• The internal battery may be completely discharged. Charge the unit following the directions given in
this manual.
• The unit may have shut down to protect the battery from overheating after a long period of operation
or charging; or the ambient temperature has dropped below -20°C. Allow the spotlight to cool down or
warm up for a period before resuming operation.
• If the ambient temperature is too hot or too cold the spotlight will not operate.
If the unit does not charge or operate after taking the steps given above, contact the manufacturer at 1-877-571-2391.
ACCESSORIES
Recommended accessories for use with your tool may be available from the manufacturer. If you need assistance regarding accessories,
please contact the manufacturer at 1-877-571-2391.
WARNING!
The use of any accessory not recommended for use with this appliance could be hazardous.
SERVICE INFORMATION
Whether you need technical advice, repair, or genuine factory replacement parts, contact the manufacturer at 1-877-571-2391.
TWO-YEAR LIMITED WARRANTY
The manufacturer warrants this product against defects in materials and workmanship for a period of TWO (2) YEARS from the date of
retail purchase by the original end-user purchaser (“Warranty Period”).
If there is a defect and a valid claim is received within the Warranty Period, the defective product can be replaced or repaired in the
following ways: (1) Return the product to the manufacturer for repair or replacement at manufacturer’s option. Proof of purchase may be
required by manufacturer. (2) Return the product to the retailer where product was purchased for an exchange (provided that the store is
a participating retailer). Returns to retailer should be made within the time period of the retailer’s return policy for exchanges only (usually
30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding
returns that are beyond the time set for exchanges.
This warranty does not apply to accessories, bulbs, fuses and batteries; defects resulting from normal wear and tear, accidents; damages
sustained during shipping; alterations; unauthorized use or repair; neglect, misuse, abuse; and failure to follow instructions for care and
maintenance for the product.
This warranty gives you, the original retail purchaser, specific legal rights and you may have other rights which vary from state to state or
province to province. This product is not intended for commercial use.
APPENDIX
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment.
SPECIFICATIONS
Light
(Conforms to UL STD.73)
Bulb:
Main LED bulb and 6 white LEDs
Battery:
Lithium-Ion, 3.6 V DC
Input:
5V DC, 1A
Imported by Baccus Global LLC,
621 NW 53rd St., Suite 450, Boca Raton, FL 33487
www.Baccusglobal.com 1-877-571-2391
RD042720
SL3HE_Manual_ENSP_042720.indd 1
SL3HE_Manual_ENSP_042720.indd 1
4/27/2020 3:36:14 PM
4/27/2020 3:36:14 PM
