background image

12

VEC1090 A

REV101103

VECTOR 5 YEAR LIMITED WARRANTY PROGRAM

This limited warranty program is the only one that applies to this product, and it sets forth all the responsibilities of Vector
Manufacturing, Ltd., regarding this product. There is no other warranty, other than described herein. 

This Vector Manufacturing, Ltd. product is warranted, to the original purchaser only, to be free of defects in materials and
workmanship for five years from the date of purchase without additional charge. The warranty does not extend to
subsequent purchasers or users. Vector Manufacturing, Ltd. will not be responsible for any amount of damage in excess
of the retail purchase price of the product under any circumstances. Incidental and consequential damages are
specifically excluded from coverage under this warranty.

This product is not intended for commercial use. This warranty does not apply to accessories or damage to units
from misuse or incorrect installation. Misuse includes wiring or connecting to improper polarity power sources.

RETURN/REPAIR POLICY

Defective products, other than accessories, may be returned postage prepaid to Vector

Manufacturing. Any defective product, other than accessories, that is returned to Vector Manufacturing within 30 days of

the date of purchase will be replaced free of charge. If such a product is returned more than 30 days but less than five

year from the purchase date, Vector Manufacturing will repair the unit or, at its option, replace it free of charge. 

If the unit is repaired, new or reconditioned replacement parts may be used, at Vector Manufacturing’s option. A unit may

be replaced with a new or reconditioned unit of the same or comparable design. The repaired or replaced unit will then

be warranted under the terms of the remainder of the warranty period. The customer is responsible for the shipping

charges on all returned items after 30 days. During the warranty period, Vector Manufacturing, Ltd. will be responsible

for the return shipping charges.

LIMITATIONS

This warranty does not cover accessories, bulbs, fuses and batteries, defects resulting from normal wear and

tear (including chips, scratches, abrasions, discoloration or fading due to usage or exposure to sunlight), accidents,

damage during shipping to our service facility, alterations, unauthorized use or repair, neglect, misuse, abuse, failure to

follow instructions for care and maintenance, fire, flood and Acts of God. 

If your problem is not covered by this warranty, call our Technical Support Department at (954) 584-4446 or toll free:

(866) 584-5504 for general repair information and charges if applicable. You may also contact us through our website

at www.vectormfg.com.

STATE LAW RIGHTS

This warranty gives you specific legal rights. Some states do not allow limitations on how 

long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so 

the exclusions or limitations stated herein may not apply. This warranty gives the purchaser specific legal rights; other

rights, which vary from state to state, may apply.

TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT

Contact Vector Manufacturing Technical Support by telephone, fax or

mail. We suggest that you keep the original packaging in case you need to ship the unit. 

When returning a product, include your name, address, phone number, dated sales receipt (or copy) and 

a description of the reason for return and product serial number. After repairing or replacing the unit, we will 

make every effort to return it to you within four weeks.

WARRANTY ACTIVATION

Please complete Warranty Activation Card and mail to Vector Manufacturing. Enter “VEC1090

A” as Model and “12V Automatic Battery Charger 2/10/20 Amp” as  Product Type. All Vector Manufacturing, Ltd.

products must be registered within 10 days of purchase to activate this warranty. Mail the completed registration form,

along with a copy of the original sales receipt to:

ATTN.: CUSTOMER SERVICE / VECTOR MANUFACTURING, Ltd.

4140 SW 28th Way, Ft. Lauderdale, FL 33312 

PH: 954-584-4446 • TOLL FREE: 866-584-5504 • Fax: 954-584-5556. 

You may also contact us at our web site www.vectormfg.com.

WARRANTY IS NON-TRANSFERABLE AND NON-REFUNDABLE.

Содержание VEC1090 A













Отзывы: