Controls and Functions
CHARGING
With AC Charger
Plug the AC charger (included) into the jack on the back of the
S p o r t S p o t
®
1 , 0 0 0 , 0 0 0
b o d y, and then plug into a standard AC
wall outlet. Make sure the electric rating of your AC power supply
matches the requirements listed on the top of the AC charger. Make
sure the locking trigger switch is in the O F F position. The red LED
indicator light (on the right of the spotlight housing) will illuminate
to show the spotlight is charging.
For initial charge, allow 20 hours for completion of a full charging cycle. For subsequent
charges, allow a maximum of 20 hours using this method.
With 12 Volt DC Charger
Plug the DC charger (included) into the jack on the back of the
spotlight body, and then insert the plug into the 12 volt DC
a c c e s s o ry outlet of vehicle or any other 12 volt DC power sourc e .
Make sure the locking trigger switch is in the off position. The red
LED indicator light will illuminate to show that the
S p o r t S p o t
®
1 , 0 0 0 , 0 0 0
is charging.
Allow a maximum of 20 hours recharging time using the DC charging
method.
Note:
Be sure to use only the adapter cords supplied by the manufacturer for recharging. The
use of unauthorized adapter cords may damage the unit and will void the warranty.
HALOGEN BULB
RUBBER BEZEL
ON/OFF TRIGGER
SWITCH
TRIGGER
LOCKING BUTTON
5
SL101MV ManualEN 101007.qxp 9/26/08 12:44 PM Page 5
