FIGURE 1
3. CHARGING
NOTE:
During charging, use the handy, built-in stand (see Figure 2) to provide a
steady base for the spotlight on floor, shelf, workbench or vehicle floor.
Charging with AC 110/120 volt AC charger -
plug the AC charger (includ-
ed) into the barrel receptacle on the back of the spotlight body, and then plug into
a standard AC wall outlet. Make sure the electric rating of your AC power supply
matches the requirements listed on top of the AC charger (110 volt AC). Make
sure the locking trigger switch is in the OFF position. For initial charge, allow 18-
20 hours for completion of a full charging cycle. For subsequent charges, allow
approximately 15 hours. Never overcharge!
NOTE:
Charging from a 110/120 volt AC power source is the most efficient method
and is especially recommended for first-time charging.
Charging with 12 volt DC charger
- plug the DC fused recharge/power
adapter (included) into the barrel receptacle on the back of the spotlight body, and
then insert the plug end into the accessory outlet of your vehicle or other 12 volt
DC power source. Make sure the locking trigger switch is in the OFF position.
Allow approximately 3 hours charging time if the engine is running. You may use
the spotlight while its internal battery is recharging.
NOTE:
Be sure to use only the adapter cords supplied by the manufacturer for
recharging - The use of unauthorized adapter cords may damage the unit and will
void the warranty.
2
HANGING HOOK
AREA LIGHT
BUILT--IN
WORKSTAND
TRIGGER LOCK
AREA LIGHT SWITCH
RECHARGE PORT
TRIGGER SWITCH
