![background image](http://html1.mh-extra.com/html/vector/sport-spot-vec138y/sport-spot-vec138y_owners-manual-and-warranty-information_3802161005.webp)
3
4. OPERATION
The Vector Sport Spot
®
can be operated with or without the battery installed.
Operation from external 12 volt DC source with at least 10 amps capacity will
allow lamp operation and internal battery charge.
4.1 SPOT LIGHT
Using the locking trigger switch:
1. The trigger switch is located on the front of the grip handle of the
spotlight (see Figure 1).
2. To turn the spotlight on, squeeze the trigger switch.
3. To turn the spotlight off, release the trigger switch.
4. To lock the trigger switch into the ON position for continuous operation,
squeeze the trigger switch and firmly press the trigger locking button located
on the side on the handle (see Figure 1); the spotlight will stay on until the lock
is released.
4.2 AREA UTILITY LIGHT
1. The area light will provide 18 hours of continuous utility lighting, as a light for work
areas, or use as a campsite area light, for power outage, etc.
2. The ON/OFF button for the area light is located near the bottom of the grip, on
the left side of the unit (see Figure 1).
3. To turn the area light on, press the ON/OFF button.
4. To turn the area light off, press the ON/OFF button once more.
5. HANDS-FREE OPERATION
5.1 HANGING HOOK
1. Unsnap the workstand legs from over the hanging hook and spread them apart
so you can lift the hook into the upright position (see Figure 3).
2. Return the stand legs to the storage bracket.
3. Use the hook to position the spotlight in any safe, convenient location for
hands-free use.
4. For hand-held use: open the stand legs, fold the hook down, and snap the legs
back into the storage bracket.
5.2 BUILT-IN STAND
1. Unsnap the leg stands from over the hanging hook and spread them apart so you
can lift the hook into the upright position, do not over extend (see Figure 3).
2. Push the legs towards the front of the spotlight and the hook towards the back,
creating a tripod.
3. Turn the spotlight upside-down,
and rest it on the stand (see Figure 3).
4. The spotlight and/or area utility light
may now be used hands-free.
5. For hand-held operation, simply
fold the hook down and snap
the legs back into the storage bracket.
FIGURE 2 -
BUILT-IN STAND
AREA LIGHT
ON/OFF
SWITCH
HANGING HOOK
UTILITY WORK STAND