Vector 4003, Инструкция по установке, эксплуатации и обслуживанию

Страница: 22 / 36

Wanner Engineering, Inc.
22
United States Instant Information: www.vectorpump.com
(612) 332-5681 Fax (612) 332-6937 VEC-991-4000B
Vector 4000 Maintenance
6.6 ADDITIONAL INFORMATION
Note: The numbers in parentheses are Reference Numbers located in the Parts List exploded views of this manual.
6.6.1 MAINTENANCE AND PERIODIC INSPECTIONS TABLE
(4003, 4004, 4006, 4007, 4010, and 4014) .
1 Pump hose replacement In prevention, change the pump hose
after 90 % of the life time of the first
hose.
See 6.3.
2 Lubricant replacement. At the end of two hose changes or 5000
hours of use. Otherwise, in every hose
break
See 6.1. and 9.3.
3 Gearbox oil replacement. Refer to the gearbox maintenance
manual provided with the pump.
4 Replacement of the seal ring (27). In case of presence of lubricant in the
leak channel.
See 6.4.2.
5 Replacement of the shaft seal (26). In case of presence of lubricant in the
leak channel.
See 6.4.2.
6 Replacement of the shaft seal (105)
and (106)
In case of presence of oil in the leak
channel or at the lip seals.
See 6.4.2. and 6.6.
7 Replacement of the shoes. If these are worn on the contact
surface.
See 6.4.1.
8 Replacement of the cover seal (10). In the case of a leak around the pump
cover.
See 6.3.2.
8 Replacement of the sleeves (6). If damaged. Refer to 6.3. Perform steps
1 thru 4 of 6.3.1 and change
sleeves. Use care.
9 Replacement of the bearings (103)
and (104)
If there are abnormal noises coming
from the bearing case.
See 6.4. and 6.6.
9 Check the lubricant level. Before starting the pump and
periodically during the pump service.
6.1.
10 Check for lubricant leakage at the
leakage channel.
Before starting the pump and periodi-
cally during the pump service.
See 6.4.
11 Check the pump casing to dis-
cern possible leakages around the
cover, the sight glass, the flanges and
the sleeves.
Before starting the pump and periodi-
cally during the pump service.
12 Check for wear on the shoe’s pressing
surface.
At every hose change. See 6.4.
13 Check the presence of a gearbox oil
leakage.
Before starting the pump and periodi-
cally during the pump service.
See 3.5.
14 Check for strange noises coming
from the pump, gearbox and bear -
ing case or abnormal pump casing
temperature.
Periodically during the pump service.