VECTECH SD-150, Руководство по эксплуатации

Страница: 15 / 28

Dormant
If the sleep and work mode have been selected, the soldering iron 20 Minutes of non-use, the power supply of the soldering iron will be reduced,
And show
Will drop to 200 ℃ (if the set working temperature is greater than or equal to 200 ℃) or 50 ℃ (If the working temperature is lower
than 200 ℃), and keep this temperature until the soldering iron table resumes work.
, This state can sleep for a while, when the host is working in sleep mode, the soldering iron tip temperature
Three ways to wake up and sleep:
1 . Turn off the power switch, then turn on the power switch.
2 . Press any key
3 . Pick up the soldering iron pen
If the host goes to sleep 40 Minutes without waking up, the power supply of the soldering iron will be cut off automatically, and the
The window will also be blank.
Choose the right soldering iron tip to meet the welding requirements
1. A soldering iron tip has the largest contact area with the solder joint, the largest contact area can produce the most
The efficient heat transfer enables the operator to quickly weld high-quality solder joints.
2. You should choose a soldering iron tip that has a good path to transfer heat to the solder joint. A shorter length soldering iron tip can
More precise control, and the welding of densely assembled circuit boards may have to choose longer or certain
Angled soldering iron tip.