Outer Dimension
15.5*7.8*12(unit: mm)
Weight (Without power cord)
1Kg
* The tip temperature is measured by the thermometer 191or 192.
* The length of the handle cord can be ordered.
* Above specifications and designs will be changed without notice.
2.2 Characteristic
⑴
The thermocouple sensor locates on the top of tip. Recovery of the temperature and calefactive
is rapid and exactly. Display the double temperature with the large LCD by microcomputer and
Control the temperature by PID. Especially it is suitable to the lead free soldering.
⑵
The switch power supplies the power supply and protects the short circuit, over temperature and
over voltage and reduces the loss of the copper and the iron. Besides, the output power is stable
and not fluctuating with the voltage fluctuating.
⑶
Lock the calibration and the parameter setting with the password.
⑷
Set the parameters by three keys. Sleep or turn off automatically at the setting time.
⑸
The up and down limited temperature can be set according to the demands. If the temperature
exceeds the setting limit value, the soldering station sounds alarm.
⑹
Digital calibration and operate conveniently and easy.
⑺
Various types of tips are available and replace tips conveniently.
⑻
The weight is light and the appearance is original.
⑼
ESD safe design.
3
．
Operation instruction
Note: please check the power supply is according to the rating voltage on the
nameplate of the device before installing the solder station.
3.1 Iron Holder and Sponge
1 Dampen the small cleaning sponge with water and then squeeze it dry. Place it in the groove of
the iron holder base.
2 Add a little water to the iron holder. The small sponge will absorb the water to keep the large
sponge above it wet all times. It may only use big sponge and not use small one.
3 Dampen the larger cleaning sponge and place it on the iron holder base.
Note: If the sponge becomes dry during working, add appropriate water.
Tips
Page4
