VECTECH ET9181, Инструкция по эксплуатации

Страница: 17 / 32

17
5.2.2
Z Speed
Z Speed is used to set the speed at which the Z axis moves during soldering
process.
1) In Setup menu, press “ + ” or “ - ” key to move the cursor to Z Speed .
2) Press “
SET
” key to activate value (Blue indicates value can be modified).
3) Press “ + ”or “ - ” key to adjust speed, the speed range is 5
～
300mm/s.
4) Press “ SET ” key to save.
5) Press “ ECS ” key to back to Main menu.
5.2.3
Tin Speed
Tin Speed is used to set speed at which the tin moves during feeding
process.
1) In Setup menu, press “ + ” or “ - ” key to move the cursor to Tin Speed .
2) Press “ SET ” key to activate value (Blue indicates value can be modified).
3) Press “ + ”or “ - ” key to adjust speed, the speed range is 5
～
60mm/s.
4) Press “ SET ” key to save.
5) Press “
ECS
” key to back to
Main
menu.