Cleaning and Maintenance
WARNINg: The unit uses a 230V supply and contains rotating mechanical parts.
• Before carrying out any maintenance or cleaning operations the mains electrical supply MUsT be dis-
connected
.
•
Heat Exchanger maintenance must be done professionally. Contact Vectaire service Department for
Advice.
• The air filters of the Vectaire WHHR100/90DC-B Plus should be cleaned regularly by a suitably qualified
person (the frequency of cleaning will vary depending on the installation environment).
To clean the filters
• Remove the main access panel
• Remove the rubber inserts from the filter slots (where fitted) and slide out the filters from the internal
mouldings.
• Clean the filters carefully using a vacuum cleaner and refit.
• Replace the rubber inserts into the slots.
• Replace the access panel and ensure it is securely located.
• Power to the unit can now be restored.
Filter Replacement
Filters should be cleaned annually and replaced when heavily contaminated.
Replacement filters are available from Vectaire - call us on +44 (0) 1494 522333 or via
Page 7
Vectaire Ltd, Lincoln Road, Cressex Business Park, High Wycombe, Buckinghamshire, HP12 3RH
Tel: +44 (0)1494 522333. Fax: +44 (0)1494 522337. Email: [email protected]
WHHR100/90DC-B Plus Bypass-Mayt 2016
E & O.E
