10
©Vecow ABP-3000 User Manual
GETTING TO KNOW YOUR ABP-3000
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100Mbps Ethernet network; The LED indicator
on the right bottom corner lightens in solid orange when the cable is properly
connected to a 1000Mbps Ethernet network; The left LED will keep twinkling/off
when Ethernet data packets are being transmitted/received.
LED Location LED Color
10Mbps
100Mbps 1000Mbps
Right
Green/
Orange
Off
Solid
Green
Solid
Orange
Left
Yellow
Twinkling
Yellow
Twinkling
Yellow
Twinkling
Yellow
1
8
PoE LED
LED Color
PoE Status
LED 1 - 2
Solid Green
PoE ON
2.2.9 10/100/1000 Mbps Ethernet Port
There are two 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet connections
on the front side of ABP-3000. LAN 1 and LAN 2 are powered by Intel
®
I350 Ethernet
engine.
• Intel
®
I350 Gigabit Ethernet Controller supports 1Gbps data ratet
• IEEE 802.3 Fast Ethernet over optical fiber standard compliant
• IEEE 1588 Precision Time Protocol (PTP)
• Up to 9.5KB Jumbo Frame
• Dual 100BASE-FX fiber ports
• Supports Wake-on-LAN (WoL) & PXE
Using suitable RJ-45 cable, you can connect the ABP-3000 system to a
computer or to any other devices with Ethernet connection, for example, a hub
or a switch. Moreover, both LAN 1 and LAN 2 support "Wake" on LAN and pre-
boot functions. The pinouts of LAN 1 and LAN 2 are listed in the following chart :
